Processor & Chipset |
CPU Socket |
LGA 1150 (Socket H3) |
Supported Processors |
- Intel 6th Generation Skylake Core i7 / i5 / i3, Pentium, and Celeron Processors
- Intel 7th Generation Kaby Lake Core i7 / i5 / i3, Pentium, and Celeron Processors
|
Number of processors (std/max) |
1/1 |
Processor Cooling |
Active Heatsink |
Chipset |
Intel Q170 Chipset |
Memory |
Memory Capacity |
Up to 64GB of unbuffered, non-ECC dual channel DDR4 2133 MHz memory |
Memory Sockets |
4x 288-Pin DIMM sockets |
Standard / Integrated Devices |
Network Controllers |
- LAN1: Intel I219LM Clarkville-V with Intel® AMT 11.0 supported
- LAN2: Intel I210 PCIe controller
- Supports 10/100/1000 Mbps operation, with both half- and full-duplex operation at 10/100 Mbps, and full-duplex operation at 1000 Mbps
|
Graphics |
- Intel HD Graphics technology is integrated into the processor and varies depending on the processor you select.
- VGA (up to 1920×1200 @ 60 Hz)
- Internal DisplayPort (iDP) interface for HDMI, LVDS, VGA, DVI, DisplayPort (up to 3840×2160 @60 Hz)
|
BIOS |
AMI Unified Extensible Firmware Interface (UEFI) BIOS |
Watchdog Timer |
This system features a watchdog timer, which ensures that this system will always recover from catastrophic conditions that cause the computer to crash. When the CPU stops working correctly, the watchdog timer either performs a processor reset or a Non-maskable interrupt (NMI) to bring the system back to a known state. The watchdog timer is software programmable and can be set from 1 to 255 seconds, after which it will generate an interrupt or reset signal. |
Audio (optional) |
Audio is available with the use of the HD audio kit. The HD audio kit features a Realtek ALC892 7.1+2 Channel High Definition Audio Codec |
Digital I/O |
This system features a Digital I/O (DIO) connector which is interfaced to the GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. |
Trusted Platform Module (optional) |
TPM 1.2 & 2.0 hardware security function supported by optional TPM module |
Remote Management |
IPMI 2.0 supported via optional iRIS module |
I/O PORTS |
Front Panel I/O Ports |
2x USB 2.0 Ports
2x USB 3.0 Ports (optional)
|
Rear Panel I/O Ports |
1x DB-15 VGA port
2x USB 3.0 ports
2x USB 2.0 ports (optional 8x additional USB 2.0 ports available)
2x Gigabit Ethernet interfaces (10/100/1000 BASE-T RJ-45)
2x DB-9 RS-232 serial ports |
Internal I/O Ports |
HD Audio Kit header
Digital I/O Connector
2x USB 3.0 ports via pin header
6x USB 2.0 ports via pin header
4x USB 2.0 ports via pin header on backplane
I²C connector
SMbus connector
Keyboard and mouse header for PS/2 devices
Parallel port header
1x RS-422/485 header
4x RS-232 headers
TPM header |
Supported Bus Interfaces |
- PICMG 1.3 server-class single board computer specification for System Host Boards (SHB)
- PCI Express ×1, ×4, ×8, ×16
- 32-bit 5V or 3.3V PCI
- 64-bit 5V or 3.3V PCI
|
Expansion slots |
- 14 total slots
- 1 full-length (PICMG 1.3) slot reserved for System Host Board (SHB)
- 9/10 full-length full-height slots up to 13.3" in length (depends on the backplane)
- 2/3 half-length full-height slots up to 9" in length (depends on the backplane)
- 1 full-size/half-size Mini PCI Express slot (supports mSATA co-lay SATA port 6)
- 4 x PCI link via golden finger
- 16-lane PCIe link from CPU via golden finger:
Supports one PCIe x16, or two PCIe x8, or two PCIe x4 + one PCIe x8 slots on the backplane (configured via BIOS)
- 4-lane PCIe link from PCH via golden finger:
Supports four PCIe x1 slots or one PCIe x4 slot on the backplane (configured via BIOS switch)
|
Storage and Media |
Number of hard drives supported |
2x fixed internal 3.5" drive bays |
Interface type supported |
SATA 6Gb/s |
Storage Controllers |
Intel Q170 Chipset |
Solid State Storage |
mSATA
Solid State Drives and Disk On Module (DOM) available |
RAID capabilities |
RAID 0, 1, 5, 10 supported |
Drive Bays |
1x bay for slim-line optical drive
1x 3.5" bay |
Chassis and Power Supply |
Form Factor |
4U Rackmount |
Standard |
EIA RS-310C |
Construction |
Heavy Duty Cold Rolled Electroplated Steel |
Features |
Lockable front door
Adjustable hold down bar to prevent add-on expansion cards from coming out of their slot
Removable & washable air filter |
System Cooling |
Front: 2x 90mm fans |
Chassis Dimensions (W x H x D) |
483 x 177 x 510mm
19" x 7.0" x 20.1" |
Nominal Weight |
49 lbs |
Power Supply |
Standard rear mounted 650W, 100 - 240VAC, 50-60Hz, 12-6 Amp power supply
Optional mini-redundant power supplies available
Optional 12V, 24V, 36V, 48V, 72V, or wide input range DC power supplies available |
Environment |
Operating temperature |
-20°C to 60°C (14°F to 140°F) |
Non operating temperature |
-30°C to 85°C (-22°F to 185°F) |
Relative humidity (operating) |
5% to 93% non-condensing |
Altitude (operating) |
Up to 3000m; maximum ambient temperature is derated by 1° C per 500m above 500m |
Certification (power supply) |
OPP, OVP, UVP, OCP, OTP, SCP, cTUVus, TUV, CB, CCC, BSMI, EAC, CE, Energy Star, RoHS, WEEE, ErP Lot 6, REACH |