RH-1X5 RH-1X5 RH-1X5 RH-1X5 RH-1X5 RH-1X5 RH-1X5


Rhino 1X5

Rugged Military Grade 1U Single Xeon E5 Server, Intel C602 chipset

1U rugged rackmount server, based on the Intel Server C602 chipset, supports one Sandy Bridge Xeon E5 processor, one full-height PCI Express 3.0 x16 slot, and meets or exceeds MIL-STD 810G shock and vibration standards

  • Built on the Intel C602 Server Chipset Platform
  • Supports Intel Xeon E5-2600/1600 and E5-2600/1600 v2 processors
  • Up to 512GB ECC DDR3 memory, up to 1866MHz
  • Two onboard Gigabit Ethernet ports
  • Integrated IPMI 2.0 and KVM with dedicated ethernet port for remote management capability
  • One PCI Express 3.0 x8 (in x16) full-height slot allows for added network or specialized functionality expansion capability
  • Up to eight 2.5" SATA SSD/HDDs or two 2.5" SATA SSD/HDDs and one slim optical drive

In stock

MFR Part
Enoch Systems


* Required Fields

Price as Configured:

In stock



    The Rhino 1X5 1U rugged server is designed to meet and exceed MIL-STD 810G shock and vibration standards and test methods. Rhino 1X5 features a hybrid aluminum and steel construction giving it a rigged structure while also being lightweight. The side walls, front and rear faceplates are milled out of 6000 series aircraft aluminum stock to a thickness of no less than 10mm with a patent-pending tab interlocking system for rigidity. The base, side walls, center brace, front and rear faceplates for the base structure of the 1X5 and are fastened together with screws every 2” and reinforced with a high performance epoxy adhesive. The end result is a permanently bonded 1-piece base chassis structure that will protect the system from high vibration environments and prevent chassis deflection and flexure.

    Through-hole electronic components such as capacitors and toroid inductors, on the motherboard and power supply, are often only mounted by their wire leads. Under vibration, the lead wire can fatigue and break and result in catastrophic failure of the system. In the Rhino 1X5 these wire lead components are staked and secured using MIL-A-46146 RTV adhesive to prevent these failures under sustained MIL-STD 810G vibration conditions.

    Processor & Chipset
    CPU Socket Single Socket R (LGA 2011)
    System Bus QPI up to 8.0GT/s
    Processor Intel Xeon processor E5-2600/1600 Sandy Bridge-EP and E5-2600/1600 v2 Ivy Bridge-EP family, up to 12 cores and up to 130W
    * BIOS version 3.0 or above is required
    * E5-1600 series CPU does not support LRDIMM type memory
    Number of processors (std/max) 1/1
    Processor Cooling Active
    ChipsetIntel C602 chipset
    Memory CapacityUp to 512GB DDR3 ECC LRDIMM (Load Reduced Dual-inline Memory Module)
    Up to 256GB DDR3 ECC RDIMM (Registered Memory Module)
    Up to 64GB DDR3 ECC/non-ECC UDIMM (Unregistered Memory Module)
    Memory Sockets8x 240-pin DDR3 DIMM sockets
    DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
    Memory Voltage
    1.5 V, 1.35 V
    Error Detection
    Corrects single-bit errors
    Detects double-bit errors (using ECC memory)
    Standard / Integrated Devices
    Network ControllersIntel 82574L Dual Port Gigabit Ethernet
    Virtual Machine Device Queues reduce I/O overhead
    Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    GraphicsMatrox G200eW 16MB DDR2 graphics
    IPMISupport for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    Nuvoton WPCM450RA0BX
    BIOS Type
    BIOS Features
    Plug and Play (PnP)
    APM 1.2
    DMI 2.3
    PCI 2.3
    ACPI 1.0 / 2.0 / 3.0 / 4.0
    USB Keyboard support
    Hardware BIOS Virus protection
    SMBIOS 2.7.1
    UEFI 2.3.1
    RTC (Real Time Clock) Wakeup
    Super I/OWinbond Super I/O 83527
    I/O Ports
    Front Panel I/O Ports 2x USB 2.0 Ports via internal USB headers
    Rear Panel I/O Ports 2x PS/2 Keyboard/Mouse ports
    1x DB-15 VGA port
    2x USB 2.0 ports
    2x RJ-45 Gigabit Ethernet ports (10/100/1000 BASE-T)
    1x RJ-45 Dedicated IPMI Ethernet port
    1x DB-9 serial port
    Internal I/O Ports USB Headers for up to 6x additional USB 2.0 ports
    1x internal USB Type A port
    1x serial port header
    1x TPM 1.2 20-pin Header
    Expansion Slots
    Supported Bus Interfaces PCI Express
    Expansion Slots1x full-height PCI Express 3.0 x8 (in x16) slot
    Storage and Media
    Number of data drives supported Eight 2.5" SATA SSD/HDD bays or
    Two 2.5" SATA SSD/HDDs and one slim optical drive
    Interface type supported2x SATA 3.0 ports (6Gb/s)
    4x SATA 2.0 ports (3Gb/s)
    4x SATA ports (3Gb/s) via SCU
    Solid State StorageSolid State Drives and Disk On Module (DOM) available
    DOM power connector support
    Form Factor 1U Rackmount
    ConstructionCold-rolled steel sheet metal
    Milled Aluminum 6061
    FeaturesChassis intrusion detection
    System Cooling 5x 40x28mm PWM 19.10 CFM fans
    Chassis Dimensions (W x D x H) 480mm x 508mm x 44.50mm
    18.90″ x 20″ x 1.75″
    Power Supply
    500W 90V to 264V AC power supply
    Supports auto range AC single or redundant power supplies
    Redundant and DC power supply options available
    24V, 36V, 48V, 72V, and wide input DC power supply options available
    Operating Temperature0°C to 55°C (32°F to 131°F)
    Operational temperature up to 70°C is available with the use of select Xeon processors
    Operational temperature down to -40°C is possible with solid-state drives, optional internal heater and conformal coating
    Storage Temperature
    -55°C to 85°C (-67°F to 185°F)
    Humidity (operating)0% to 95% condensing @ 60°C (with conformal coating)
    0% to 95% non-condensing @ 60°C (without conformal coating)
    Altitude (operating) Up to 10,000 ft.
    Altitude (non-operating) Up to 40,000 ft.
    Vibration (operating) MIL-STD-810G, Tested to method 514.6, Procedure I, Category 4, 10-500Hz, 1.04Grms vertical, 0.204Grms transverse, and 0.704 longitudinal axis, 60min. per axis with solid-state drives
    Shock (operating) Functional Test, MIL-STD-810G, Tested to method 516.6, Procedure I, 20G, 11ms, 3 per axis with solid-state drives
    Enoch Systems RH-1X5 Attributes
    SKU 44679
    Manufacturer Enoch Systems
    Part Number RH-1X5
    Description Rugged Military Grade 1U Single Xeon E5 Server, Intel C602 chipset
    Availability Build-to-Order (BTO)
    Lifecycle Status Active
    Form Factor 1U Rackmount
    Processor Support Xeon E5, Xeon E5 v2
    Processor Codename Ivy Bridge EP
    Processor Socket LGA 2011 (Socket R)
    Chipset Intel C602
    Product Life Cycle 5-year product life-cycle
    Rack Depth 20"
    Special Features Rugged Military Grade
    Memory Standard DDR3
    Memory Sockets 8
    Max Memory 64GB, 256GB, 512GB
    External Expansion Slots 1x full-height slot
    Ethernet Ports 2x RJ-45 Gigabit Ethernet
    More from Enoch Systems
    1. NET08
    2. CA-178 1ft
      CA-178 1ft
    3. POE33108PFM
    4. FANGRILL-60
    5. SRT8/72/EDO
    6. 822-9